Dell PowerEdge M420 Reference Manual page 1594

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Parameter Description
Parameter
ip-address
hostname
port
keyword
Keywords Table
Options
/debug
/line
/localecho
<cr>
port
Port Table
Keyword
bgp
chargen
cmd
daytime
discard
domain
echo
exec
1590
System Management Commands
Description
Valid IP address of the destination host.
Hostname of the destination host. (Range: 1–158 characters).
The command allows spaces in the host name when
specified in double quotes. For example,
console(config)#snmp-server host "host name"
A decimal TCP port number, or one of the keywords from the
port table in the usage guidelines (see Port Table below).
One or more keywords from the keywords table in the user
guidelines (see Keywords Table below).
Description
Enable telnet debugging mode.
Enable telnet linemode.
Enable telnet localecho.
Press ENTER to execute the command.
Enter the port number. Refer to the following table.
Description
Border Gateway Protocol
Character generator
Remote commands
Daytime
Discard
Domain Name Service
Echo
Exec
Port Number
179
19
514
13
9
53
7
512

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents