Show Ip Ospf Interface - Dell Force10 MXL Blade Reference Manual

Ftos command line reference guide for the mxl 10/40gbe switch io module

Hide thumbs Also See for Force10 MXL Blade:

Table of Contents

Table 21-9. show ip ospf process-id database summary Command Description

show ip ospf database

show ip ospf interface

Display the OSPF interfaces configured. If OSPF is not enabled on the switch, no output is generated.

show ip ospf process-id interface [ interface ]

Command Modes

EXEC Privilege

Version 8.3.16.1

Displays the TOS options. Option 0 is the only option.

Displays the LSA metrics.

Displays OSPF database information.

Enter the OSPF Process ID to show a specific process.

If no Process ID is entered, command applies only to the first OSPF process.

(OPTIONAL) Enter the following keywords and slot/port or number information:

For the null interface, enter the keyword

For loopback interfaces, enter the keyword

For Port Channel groups, enter the keyword

Range: 1-128

For a 10-Gigabit Ethernet interface, enter the keyword

followed by the slot/port information.

For a VLAN, enter the keyword

For a 40-Gigabit Ethernet interface, enter the keyword

slot/port information.

Introduced on MXL 10/40GbE Switch IO Module

followed by zero (0).

followed by a number from 0

port-channel

TenGigabitEthernet

followed by the VLAN ID. The range is from 1

Open Shortest Path First (OSPFv2) | 423

followed by a number:

followed by the