Dell PowerEdge M420 Reference Manual page 1616

User Guidelines
The selected mode is valid if mode-change confirm is executed within 60
seconds. The selected mode is applied as operational mode on resetting the
configuration to factory defaults.
Example
console(config)#mode simple
Warning: Confirm mode selection within 60 seconds
using "mode-change confirm" command.
mode-change confirm
Use the mode-change confirm command to confirm the mode selection.
Syntax
mode-change confirm
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command must be executed within 60 seconds of executing the mode
simple or no mode simple command. The selected mode is applied as
operational mode.
Example
console(config)#mode-change confirm
quit
Use the quit command in User EXEC mode to close an active terminal
session by logging off the switch.
1612
User Interface Commands