Timers Spf; Timers Throttle Lsa All - Dell Force10 MXL Blade Reference Manual

Command
Version 8.3.16.1
History
Usage The command
Information
With "not-advertise" parameter configured, this command can be used to filter out some external
routes. For example, you want to redistribute static routes to OSPF, but you don't want OSPF to
advertise routes with prefix 1.1.0.0. Then you can configure
255.255.0.0 not-advertise
Related
area range
Commands

timers spf

Set the time interval between when the switch receives a topology change and starts a shortest path first
(SPF) calculation.
Syntax timers spf delay holdtime
To return to the default, use the no timers spf command.
Parameters
delay
holdtime
Defaults delay
Command Modes
ROUTER OSPF
Command
Version 8.3.16.1
History
Usage Setting the delay and holdtime parameters to a low number enables the switch to switch to an alternate
Information
path quickly but requires more CPU usage.

timers throttle lsa all

Configure LSA transmit intervals.
Syntax timers throttle lsa all {start-interval | hold-interval | max-interval}
To return to the default, use the no timers throttle lsa command.
Introduced on MXL 10/40GbE Switch IO Module
area range summarizes routes for the different areas.
Summarizes routes within an area.
Enter a number as the delay.
Range: 0 to 4294967295.
Default: 5 seconds
Enter a number as the hold time.
Range: 0 to 4294967295.
Default: 10 seconds.
= 5 seconds; holdtime = 10 seconds
Introduced on MXL 10/40GbE Switch IO Module
summary-address 1.1.0.0
to filter out all the routes fall in range 1.1.0.0/16.
Open Shortest Path First (OSPFv2) | 431