Show Captive-Portal Configuration Client Status - NETGEAR ProSafe GSM7224P User Manual

If the interface is specified, the following terms are displayed.
Term Definition
CP ID
The ID of the captive portal associated with the client
CP Name
The name of the captive portal associated with the client
Protocol
The protocol the client is using
Verification
The user verification mode
Example
(switch)
#show captive-portal interface client status
Client Client
Intf Intf Description
------ -----------------------------------
---------------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit
1/0/2 Unit: 1 Slot: 0 Port: 2 Gigabit
1/0/3 Unit: 1 Slot: 0 Port: 3 Gigabit
(switch)
#show captive-portal interface 1/0/1 client status
Interface................................. 1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigabit
Client Client
MAC Address
-----------------
------------
0002.BC00.1290 10.254.96.47
0002.BC00.1291 10.254.96.48

show captive-portal configuration client status

Use this command to display the clients authenticated to all captive portal configurations or a
to specific configuration. <1-10> is the captive portal ID.
Format
show captive-portal configuration [ <1-10> ] client status
Mode
Privileged EXEC mode
Term Definition
CP ID
The captive portal ID
CP Name
The captive portal name
Client MAC
The MAC address of the client associated with the captive portal instance.
Address
Client IP Address
The IP address of the client associated with the captive portal instance
Interface
The interface on which the client is authenticated.
ProSafe Managed Switch
IP Address CP ID
---------------
1
2
Captive Portal Commands
MAC Address
-----------------
0002.BC00.1290
0002.BC00.1292
0002.BC00.1293
CP Name Protocol
----- --------------
cp1
cp2
707
IP Address
10.254.96.47
10.254.96.49
10.254.96.50
Verification
--------
http local
http local