Dhcp Server Commands; Show Clock - NETGEAR GSM7228PS Cli Manual

Term Definition
Last Attempt Last server attempt time for the specified server.
Time
Last Update Last server attempt status for the server.
Status
Total Unicast Number of requests to the server.
Requests
Failed Unicast Number of failed requests from server.
Requests

show clock

This command is used to display the time information.
Format
show clock [detail]
Mode Privileged EXEC
Term Definition
Time The time provided by the time source.
Time Source The time source type.
If option detail is specified, these terms are displayed
Time Zone The time zone configured.
Summer Time Indicate if the summer time is enabled.

DHCP Server Commands

This section describes the commands you to configure the DHCP server settings for the switch.
DHCP uses UDP as its transport protocol and supports a number of features that facilitate in
administration address allocations.
Utility Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
9-40