No Lldp Notification-Interval; Clear Lldp Statistics; Clear Lldp Remote-Data; Show Lldp - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Format
Mode

18.1.14 no lldp notification-interval

This command is used to return the notification interval to the default value.
Format
Mode

18.1.15 clear lldp statistics

Use this command to reset all LLDP statistics, including MED-related
Format
Mode

18.1.16 clear lldp remote-data

Use this command to delete all information from the LLDP remote data table,
MED-related information
Format
Mode

18.1.17 show lldp

This command displays a summary of the current LLDP configuration.
Format
Mode
Transmit Interval
Transmit Hold
Multiplier
Re-initialization
Delay
Notification
Interval
18-4
lldp notification-interval <interval>
Global Config
no lldp notification-interval
Global Config
clear lldp statistics
Privileged Exec
.
clear lldp remote-data
Privileged Exec
show lldp
Privileged Exec
How frequently the system transmits local data LLDPDUs, in
seconds.
The multiplier on the transmit interval that sets the TTL in
local data LLDPDUs.
The delay before re-initialization, in seconds.
How frequently the system sends remote data change notifi-
cations, in seconds.
v4.1, October 2008
information
LLDP and LLDP-MED Commands
.
including