Clear Lldp Remote-Data; Show Lldp; Show Lldp Interface - NETGEAR ProSafe GSM7228PS Cli Manual

clear lldp remote-data

Use this command to delete all information from the LLDP remote data table, including MED-
related information.
Format
clear lldp remote-data
Mode Global Config

show lldp

Use this command to display a summary of the current LLDP configuration.
Format
show lldp
Mode Privileged Exec
Term Definition
Transmit How frequently the system transmits local data LLDPDUs, in seconds.
Interval
Transmit Hold The multiplier on the transmit interval that sets the TTL in local data LLDPDUs.
Multiplier
Re-initialization The delay before re-initialization, in seconds.
Delay
Notification How frequently the system sends remote data change notifications, in seconds.
Interval

show lldp interface

Use this command to display a summary of the current LLDP configuration for a specific interface
or for all interfaces.
Format
show lldp interface {<unit/slot/port> | all}
Mode Privileged Exec
Term Definition
Interface The interface in a unit/slot/port format.
Link Shows whether the link is up or down.
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-162