Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual page 233

Table 23: Statements for Logical Interface Properties (continued)
Statement
minimum-links number
mrru bytes
multicast-dlci dlci-identifier
multicast-vci
vpi-identifiervci-identifier
multilink-max-classes number
multipoint
ncp-restart-timer
oam-liveness
oam-period (disable | seconds)
output
output-policer policer-name
output-three-color policer-name
output-vlan-map
passive (CHAP)
passive (PAP)
passive-monitor-mode
peer-unit unit-number
pfc
Interface Types
Multilink interfaces
Multilink interfaces
Point-to-multipoint Frame Relay interfaces
Point-to-multipoint ATM1 and ATM2 IQ
interfaces
AS PIC or MultiServices link services IQ
interfaces ( lsq- )
All
Interfaces with PPP encapsulation
ATM1 and ATM2 IQ interfaces
ATM1 and ATM2 IQ interfaces
All
For 1-Gigabit Ethernet and 10-Gigabit
Ethernet IQ2 and IQ2-E interfaces on M
Series and T Series routers
For 1-Gigabit Ethernet and 10-Gigabit
Ethernet IQ2 and IQ2-E interfaces on M
Series and T Series routers
Gigabit Ethernet IQ interfaces
ATM2 IQ interfaces
ATM2 IQ interfaces
SONET/SDH interfaces
Logical tunnel interfaces
Interfaces with PPP, PPP CCC, or PPP TCC
encapsulation
Chapter 4: Configuring Logical Interface Properties
Usage Guidelines
JUNOS Services Interfaces Configuration
Guide
JUNOS Services Interfaces Configuration
Guide
"Configuring a Multicast-Capable Frame
Relay Connection" on page 389
"Configuring the ATM OAM F5 Loopback
Cell Threshold" on page 337
JUNOS Services Interfaces Configuration
Guide
"Configuring a Multipoint Connection" on
page 169
"Configuring the PPP Restart Timers" on
page 173
"Configuring the ATM OAM F5 Loopback
Cell Threshold" on page 337
"Defining the ATM OAM F5 Loopback Cell
Period" on page 337
JUNOS Services Interfaces Configuration
Guide
JUNOS Class of Service Configuration Guide
and "Applying a Policer" on page 795
JUNOS Class of Service Configuration Guide
and "Applying a Policer" on page 795
"Stacking and Rewriting Gigabit Ethernet
VLAN Tags Overview" on page 665
"Configuring PPP CHAP Authentication"
on page 175
"Configuring PPP PAP Authentication" on
page 175
"Enabling Passive Monitoring on
SONET/SDH Interfaces" on page 929
JUNOS Services Interfaces Configuration
Guide
"Configuring the PPP Protocol Field
Compression" on page 133
Logical Interfaces Statements List
163