Pmci Header Pattern Set Register (Min) (Pmcihdpmin) (I = 0, 1) Pmci Header Pattern Set Register (Max) (Pmcihdpmax) (I = 0, 1) - Renesas M16C/64A Series User Manual

M16C/64A Group
22.2.7 PMCi Header Pattern Set Register (MIN) (PMCiHDPMIN) (i = 0, 1)
PMCi Header Pattern Set Register (MAX) (PMCiHDPMAX) (i = 0, 1)
PMCi Header Pattern Set Register (MIN) (i = 0, 1)
(b15) (b8)
b7 b0 b7
PMCi Header Pattern Set Register (MAX) (i = 0, 1)
(b15) (b8)
b7 b0 b7
When using a header or special data detection, set the minimum width of header or special data pattern
to the PMCiHDPMIN register and the maximum width to the PMCiHDPMAX register.
Setting value n =
Set different values from data 0 or data 1 to these registers.
Each value must meet following:
•
PMCiHDPMIN register value < PMCiHDPMAX register value
•
The value other than 0000h
See Figure 22.4 "Setting Values of the Header Pattern and Data Patterns".
When not using a header or special data detection, set registers PMCiHDPMIN and PMCiHDPMAX to
0000h.
R01UH0136EJ0210 Rev.2.10
Jul 31, 2012
b0
Symbol
PMC0HDPMIN
PMC1HDPMIN
Set the minimum width of header pattern or special data pattern.
No register bits. If necessary, set to 0. Read as undefined value.
b0
Symbol
PMC0HDPMAX
PMC1HDPMAX
Set the maximum width of header pattern or special data pattern.
No register bits. If necessary, set to 0. Read as undefined value.
Minimum width (maximum width) of header or special data pattern
22. Remote Control Signal Receiver
Address
D081h to D080h
D095h to D094h
Function
Address
D083h to D082h
D097h to D096h
Function
Count source
Reset Value
XXXX X000 0000 0000b
XXXX X000 0000 0000b
Setting Range RW
0000h to 07FFh RW
—
Reset Value
XXXX X000 0000 0000b
XXXX X000 0000 0000b
Setting Range RW
0000h to 07FFh RW
—
Page 416 of 800