Table of Contents
Advertisement
M16C/64A Group
9.3.1.3
125 kHz On-Chip Oscillator Mode
The fOCO-S clock divided by 1 (no division), 2, 4, 8 or 16 is used as the CPU clock. f1 with the same
frequency of the fOCO-S clock divided by 1 is used as the peripheral function clocks.
When fC is supplied, fC and fC32 can be used as the peripheral function clocks. fOCO-S can be
used as the peripheral function clocks.
9.3.1.4
125 kHz On-Chip Oscillator Low Power Mode
The main clock is turned off after the MCU enters 125 kHz on-chip oscillator mode. The fOCO-S
clock divided by 1 (no division), 2, 4, 8 or 16 is used as the CPU clock. f1 with the same frequency of
the fOCO-S clock divided by 1 is used as the peripheral function clocks.
When fC is supplied, fC and fC32 can be used as the peripheral function clocks. fOCO-S can be
used as the peripheral function clocks.
9.3.1.5
Low-Speed Mode
fC is used as the CPU clock.
When the CM21 bit is 0 and the CM11 bit is 0 (main clock), f1 with the same frequency of the main
clock divided by 1 is used as the peripheral function clocks. When the CM21 bit is 0 and the CM11 bit
is 1 (PLL clock), f1 with the same frequency of the PLL clock divided by 1 is used as the peripheral
function clocks. When the CM21 bit is 1 (on-chip oscillator clock), f1 with the same frequency as the
fOCO-S clock divided by 1 is used as the peripheral function clocks.
fC and fC32 can be used as the peripheral function clocks. When fOCO-S is supplied, it can be used
as the peripheral function clocks.
9.3.1.6
Low Power Mode
The main clock is stopped after the MCU enters low-speed mode. fC is used as the CPU clock. When
the CM21 bit is 1 (on-chip oscillator clock), f1 with the same frequency as the fOCO-S clock divided
by 1 is used as the peripheral function clocks.
fC and fC32 can be used as the peripheral function clocks. When fOCO-S is supplied, it can be used
as the peripheral function clocks.
R01UH0136EJ0210 Rev.2.10
Jul 31, 2012
9. Power Control
Page 115 of 800
Advertisement
Table of Contents
