Table of Contents
Advertisement
M16C/64A Group
EXSDEN (Special pattern detect block select bit) (b6)
EXHDEN (Header pattern detect block select bit) (b7)
Use these bits when PMC0 and PMC1 are linked and operated in pattern match mode. Otherwise, set
them to 0.
Set bits EXHDEN to EXSDEN to 01b or 10b when setting the HDEN bit in the PMC0CON0 register to 1
(header enabled) and SDEN bit to 1 (special data pattern enabled). Refer to 22.3.3.2 "Header and
Special Data Detection".
R01UH0136EJ0210 Rev.2.10
Jul 31, 2012
22. Remote Control Signal Receiver
Page 408 of 800
Advertisement
Table of Contents
