Renesas M16C/64A Series User Manual page 696

M16C/64A Group
FMR06 (Program status flag) (b6)
This bit indicates the auto-program operation state.
Condition to become 0:
• Execute the clear status command.
Condition to become 1:
• Refer to 30.8.6.1 "Full Status Check".
Do not execute the following commands when the FMR06 bit is 1:
Program, block erase, lock bit program, and block blank check.
FMR07 (Erase status flag) (b7)
This bit indicates the auto-erase operation state.
Condition to become 0:
• Execute the clear status command
Condition to become 1:
• Refer to 30.8.6.1 "Full Status Check".
Do not execute the following commands when the FMR07 bit is 1:
Program, block erase, lock bit program, and block blank check.
R01UH0136EJ0210 Rev.2.10
Jul 31, 2012
30. Flash Memory
Page 663 of 800