Notes On Protection - Renesas M16C/64A Series User Manual

M16C/64A Group
5.3

Notes on Protection

After setting the PRC2 bit to 1 (write enabled), by writing to a given SFR, the PRC2 bit becomes 0 (write
disabled). Change the registers protected by the PRC2 bit in the next instruction after setting the PRC2 bit
to 1. Make sure there are no interrupts or DMA transfers between the instruction that sets the PRC2 bit to
1 and the next instruction.
R01UH0136EJ0210 Rev.2.10
Jul 31, 2012
5. Protection
Page 42 of 800