Renesas M16C/64A Series User Manual page 498

M16C/64A Group
ACKD (ACK data bit) (b4)
ACKC (ACK data output enable bit) (b5)
SWC9 (SCL wait auto insert bit 3) (b7)
This bit is used in slave mode of I
2
to 1 (I C mode). Do not set this bit to 1 when the IICM bit is 0.
SCLHI (SCL output stop bit) (b6)
This bit is used in master mode of I
2
register to 1 (I C mode). Do not set this bit to 1 when the IICM bit is 0.
R01UH0136EJ0210 Rev.2.10
Jul 31, 2012
2
C mode. To set this bit to 1, preset the IICM bit in the UiSMR register
2
C mode. To set this bit to 1, preset the IICM bit in the UiSMR
23. Serial Interface UARTi (i = 0 to 2, 5 to 7)
Page 465 of 800