M16C/64A Group
22.3.3
Pattern Match Mode (Combined Operation of PMC0 and PMC1)
PMC0 and PMC1 are combined and one remote control signal can be received. In a combined
operation, data 0 and data 1 are detected in PMC0. Whether to detect the header and special data in
PMC0 or PMC1 can be selected. Select count source and remote control signal input pins in PMC1.
Table 22.11
Pattern Match Mode Specifications (Combined Operation)
Item
Clock sources
Count
sources
Division
Count operation
Detect patterns
Receive buffer
Interrupt request generation
timing
Selectable functions
R01UH0136EJ0210 Rev.2.10
Jul 31, 2012
PMC0 Circuit
Count source of PMC1
No division
Increment
•
Header
•
Data 0
•
Data 1
•
Special data
6 bytes (48 bits)
•
Receive error
•
Completion of data reception
•
Header match
•
Data 0/1 match
•
Special data match
•
Receive buffer full
•
Compare match
•
Input signal inversion
•
Digital filter
22. Remote Control Signal Receiver
Content
PMC1 Circuit
One of the following:
•
fC
•
f1
•
Timer B1 underflow
•
Timer B2 underflow
No division, divided-by-8, divided-
by-32, or divided-by-64
•
Header
•
Special data
None
Not used
Page 431 of 800