NEC NEAX 2000 Programming Manual page 1067

PUSHBUTTON CALLING - ATTENDANT ONLY
GENERAL DESCRIPTION
This service feature permits an Attendant to place all calls over tone lines from a keypad on the Attend-
ant Console.
STATION APPLICATION
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
Attendant depresses keypad to dial
SERVICE CONDITIONS
1. This feature requires that all C.O. Trunks or Tie Trunk terminals accept PUSHBUTTON signalling
(DTMF).
2. PUSHBUTTON CALLING - ATTENDANT ONLY may be added to the system without providing
PUSHBUTTON CALLING capability to other stations.
ND-91285-001(E)
DECEMBER, 1999
(1/1)
Page 285
Revision 1.0