dC111 Tag Matrix
Purpose
This NVM store provides the CSE with a means to enter, store, delete and retrieve Tag Num-
bers that show which hardware and software upgrades are incorporated in the machine.
Description
NOTE: This store is not deleted during a "dustoff" procedure, dC132 NVM initialisation.
Tags are issued with a module identifying prefix and number as follows:
•
Processor module to 001 to 250.
•
DADH module to D001 to D050.
•
Finisher module to F001 to F050.
•
Network controller to N001 to N050
The tag numbers are stored in areas defined by module and are entered into the Tag Matrix dC
111 without the prefix.
Refer to the procedure Tags. This contains a list of Tag numbers together with an description of
each of the modifications.
Procedure
1.
Enter diagnostics, GP 1.
2.
Select Diagnostic Routines, select Other Routines, select dC111Tag Matrix.
3.
Select the appropriate module button, and follow the on screen instructions.
General Procedures & Information
dC111
August 2007
6-64
WorkCentre 5687 Family