Characteristics; High Reliability; Various Interface Types; Powerful Poe Power Supply - Raisecom Gazelle S1000i-LI User Manual

Raisecom
Gazelle S1000i-LI (A) User Manual

1.2 Characteristics

1.2.1 High reliability

The Gazelle S1000i-LI is characterized by high reliability:







When the altitude increases by 220 m between 1800 and 5000 m, the highest
operating temperature of the iTN8605-NO2D decreases by 1° C.

1.2.2 Various interface types

The Gazelle S1000i-LI meets special on-site environment requirements with various
interfaces, including:






1.2.3 Powerful PoE power supply

The Gazelle S1000i-LI PoE model supports PoE, with the following characteristics:






Adopt an industrial chip and power supply, and is designed with lower power
consumption.
Possess a guide-rail chassis, all-metal shell, and fanless heat dissipation design.
Support IP40 protection grade.
Support wide-temperature working environment with the operating temperature (altitude:
0–1800 m) in the range of -40 to +75° C and storage temperature in the range of -40 to
+85° C.
Be dampproof and corrosion-resisting, and works at 5%–95% relative humidity (non-
condensing).
Pass IEC 61000-4 industrial-grade electromagnetic compatibility test with good anti-
electromagnetic interference performance.
Mean Time Between Failure (MTBF) is 35 years.
Provide various interfaces. The uplink interface supports the SFP optical interface and
the downlink interface supports the RJ45 electrical interface.
Provide the RJ45 Console interface. However, the Gazelle S1000i-2GF-8FE-LI (H)
supports the Mini-USB Console interface.
Provide the alarm output interface with Phoenix connector.
Provide the RST button to restart the entire device or restore factory settings.
Provide 110/220 VAC power supply input.
Support Endpoint PSE (PoE integrated in the Gazelle S1000i-LI).
Comply with IEEE 802.3 af (PoE).
Comply with IEEE 802.3 at (PoE+).
Support standard PDs and non-standard PDs.
Provide 8 RJ45 interfaces for PoE power supply, and meet power supply requirements of
15 W and 30 W. When all these PoE interfaces supply power, the maximum supplied
power is 240 W.
Support enabling/disabling PoE and configuring the maximum output power, power
supply mode, and power supply priority of PoE interfaces through software.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
1 Overview
2