Xilinx Zynq-7000 User Manual page 650

Select the target Family, Package, and Speed Grade. The valid devices are displayed in
the same page, and the device can be selected based on the targeted device
(Figure 5-9).
X-Ref Target - Figure 5-9
Apart from selecting the parts by using the Parts option, parts can be selected by
choosing the Boards option, which brings up the evaluation boards supported by
®
Xilinx (Figure
evaluation boards. If the XCI file of an existing IP was selected in an earlier step, the
same part should be selected here.
Zynq-7000 AP SoC and 7 Series FPGAs MIS v4.1
UG586 November 30, 2016
Figure 5-9: Default Part (Customized Window)
5-10). With this option, designs can be targeted for the various
www.xilinx.com
Chapter 5: Multicontroller Design
Send Feedback
650