Xilinx Zynq-7000 User Manual page 25

X-Ref Target - Figure 1-7
8. Click Next to proceed to the Default Part page
needs to be targeted can be selected. The Default Part page appears as shown in
Figure 1-8.
X-Ref Target - Figure 1-8
Zynq-7000 AP SoC and 7 Series FPGAs MIS v4.1
UG586 November 30, 2016
Chapter 1: DDR3 and DDR2 SDRAM Memory Interface Solution
Figure 1-7: Add Constraints (Optional)
Figure 1-8: Default Part (Default Window)
www.xilinx.com
(Figure 1-8) where the device that
Send Feedback
25