Xilinx Zynq-7000 User Manual page 547

X-Ref Target - Figure 4-36
Directory Structure and File Descriptions
Output Directory Structure
The MIG tool outputs are generated with folder name <component name>.
The output directory structure of the selected Memory Controller (MC) design from the MIG
tool is shown here. In the <component name> directory, three folders are created:
• docs
• example_design
•
user_design
Zynq-7000 AP SoC and 7 Series FPGAs MIS v4.1
UG586 November 30, 2016
Chapter 4: LPDDR2 SDRAM Memory Interface Solution
Figure 4-36: Recustomize IP
www.xilinx.com
547
Send Feedback