Xilinx Zynq-7000 User Manual page 281

8. Click Next to proceed to the Default Part page
needs to be targeted can be selected. The Default Part page appears as shown in
Figure 2-8.
X-Ref Target - Figure 2-8
Zynq-7000 AP SoC and 7 Series FPGAs MIS v4.1
UG586 November 30, 2016
Figure 2-8: Default Part (Default Window)
www.xilinx.com
Chapter 2: QDR II+ Memory Interface Solution
(Figure 2-8) where the device that
Send Feedback
281