Tunnel Flow-Label - Dell S6100 Configuration Manual

Parameters
mapped
value
Defaults 0 (Mapped)
Command Modes INTERFACE TUNNEL (conf-if-tu)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.9(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.3(0.0)
Usage Information
This command configures the method used to set the high 6 bits (the differentiated services codepoint) of the
IPv4 TOS or the IPv6 traffic class in the outer IP header.
A value of 0 copies original packet DSCP (IPv4)/Traffic Class (IPv6) to the tunnel header DSCP (IPv4)/Traffic
Class (IPv6) depending on the mode of tunnel.

tunnel flow-label

Configure the method to set the IPv6 flow label value in the outer tunnel header.
Syntax tunnel flow-label value
To return to the default value of 0, use the no tunnel flow-label value command.
Parameters
value
Defaults 0 (Mapped original packet flow-label value to tunnel header flow-label value)
Command Modes INTERFACE TUNNEL (conf-if-tu)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
1632 Tunneling
Enter the keyword mapped to map the original packet DSCP (IPv4)/Traffic Class (IPv6)
to the tunnel header DSCP (IPv4)/Traffic Class (IPv6) depending on the mode of tunnel.
Enter a value to set the DSCP value in the tunnel header. The range is from 0 to 63. The
default value of 0 denotes mapping of original packet DSCP (IPv4)/Traffic Class (IPv6) to
the tunnel header DSCP (IPv4)/Traffic Class (IPv6) depending on the mode of tunnel.
Description
Introduced on the S6100–ON.
Introduced on the C9010.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000, S4810, S4820T, Z9000.
Enter a value to set the IPv6 flow label value in the tunnel header. The range is from 0 to
1048575. The default value is 0.