Table 10-46 Txp_Mr_2.5G And Txpp_Mr_2.5G Transponder Card Fec Threshold Settings; Table 10-47 Txp_Mr_2.5G And Txpp_Mr_2.5G Transponder Card Trail Trace Identifier Settings - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G234 Change OTN Settings for TXP_MR_2.5G and TXPP_MR_2.5G Cards

Table 10-46 TXP_MR_2.5G and TXPP_MR_2.5G Transponder Card FEC Threshold Settings

Parameter
Port
Bit Errors
Corrected
Uncorrectable
Words
Table 10-47

Table 10-47 TXP_MR_2.5G and TXPP_MR_2.5G Transponder Card Trail Trace Identifier Settings

Parameter
Level
Trace Mode
Transmit
Expected
Received
Click Apply.
Step 4
Step 5 Return to your originating procedure (NTP).
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
10-64
Description
Display only. Displays the port number.
Sets the value for bit errors corrected.
Sets the value for uncorrectable words.
describes the values on the Provisioning > OTN > Trail Trace Identifier tab.
Description
Sets the level.
Sets the trace mode.
Displays the current transmit string;
sets a new transmit string.
Displays the current expected string;
sets a new expected string.
Display only. Displays the current
received string.
Chapter 10 Change Card Settings
Options
2
Numeric. Can be set for 15-minute or
one-day intervals.
Numeric. Can be set for 15-minute or
one-day intervals.
Options
Section
•
Path
•
Off/None
•
Manual
•
String of trace string size;
trail trace identifier is 64 bytes in length.
String of trace string size
String of trace string size
September 2004