Figure 7-12 Select Node/Profile Combination For Delete Dialog Box - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G125 Delete Alarm Severity Profiles

Figure 7-12 Select Node/Profile Combination For Delete Dialog Box

Note
Note
Click the node names in the Node Names list to highlight the profile location.
Step 6
Tip
Click the profile names you want to delete in the Profile Names list.
Step 7
Click OK.
Step 8
Step 9 Click Yes in the Delete Alarm Profile dialog box.
Note
To remove the alarm profile from the window, right-click the column of the profile you deleted and
Step 10
choose Remove from the shortcut menu.
Note
Note
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
7-28
You cannot delete the Inherited or Default alarm profiles.
A previously created alarm profile cannot be deleted unless it has been stored on the node. If the
profile is visible on the Alarm Profiles tab but is not listed in the Select Node/Profile
Combinations to Delete dialog box, continue with
If you hold the Shift key down, you can select consecutive node names. If you hold the Ctrl key
down, you can select any combination of nodes.
If you delete a profile from a node, it still appears in the network view
Provisioning > Alarm Profile Editor window unless you remove it using the following step.
If a node and profile combination is selected but does not exist, a warning appears: "One or more
of the profiles selected do not exist on one or more of the node(s) selected." For example, if node
A has only profile 1 stored and the user tries to delete both profile 1 and profile 2 from node A,
this warning appears. However, the operation still removes profile 1 from node A.
The Default and Inherited special profiles cannot be deleted and do not appear in the Select
Node/Profile Combination for Delete Window.
Chapter 7
Step 10.
Manage Alarms
November 2004