Table 10-54 Mxp_Mr_2.5G And Mxpp_Mr_2.5G Muxponder Card Optical Threshold Settings - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G241 Change Optical Thresholds Settings for MXP_MR_2.5G and MXPP_MR_2.5G Cards

Table 10-54 MXP_MR_2.5G and MXPP_MR_2.5G Muxponder Card Optical Threshold Settings

Parameter
Port
Laser Bias
Low (%)
RX Power
High (dBm)
RX Power Low
(dBm)
TX Power
High (dBm)
TX Power Low
(dBm)
Click Apply.
Step 4
Select the TCA (Threshold Crossing Alert) or Alarm radio button.
Step 5
Select a 15 Min or 1 Day performance monitoring interval radio button (available for TCA only), and
Step 6
then click Refresh.
Return to your originating procedure (NTP).
Step 7
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
10-76
Description
Display only. Displays the port number.
Sets the warning threshold for low laser
bias current.
Sets the warning threshold for high
receiver input power.
Sets the warning threshold for low
receiver input power.
Sets the warning threshold for high
transmitter output power.
Sets the warning threshold for low
transmitter output power.
Chapter 10 Change Card Settings
Options
1
•
2
•
3
•
4
•
5
•
6
•
• 7
• 8
• 9 (trunk for MXP_MR_2.5G)
9-10 (trunk for MXPP_MR_2.5G)
•
Numeric, in percent
Range 0 to 100 (client side)
Range 0 to 100 (trunk side)
Numeric, in dBm
Range –40.0 to +30.0 (client side)
Range –40.0 to +30.0 (trunk side)
Numeric, in dBm
Range –40.0 to +30.0 (client side)
Range –40.0 to +30.0 (trunk side)
Numeric, in dBm
Range –40.0 to +30.0 (client side)
Not applicable (trunk side)
Numeric, in dBm
Range –40.0 to +30.0 (client side)
Not applicable (trunk side)
September 2004