Figure 3-10 Cisco Metroplanner Internal Connections Table - Cisco ONS 15454 DWDM Installation And Operation Manual

NTP-G34 Install Fiber-Optic Cables on DWDM Cards
• Position-1—The first position rack, shelf, and slot. For example, Rack#1.Main Shelf.02 refers to
Slot 2 in the Main Shelf of Rack #1. Refer to the Cisco MetroPlanner Site Dialog window for rack
and shelf names and locations.
Unit-1—The ONS 15454 DWDM card (unit) that is installed in the first position slot.
•
Port#-1—The port identifier shown in the CTC for the first Position-1 connection.
•
Port ID-1—The port identifier shown in TL1 for the Position-1 connection.
•
Port Label-1—The name of the physical port printed on the card's front plate and shown in CTC
•
card view for the Position-1 connection.
Attenuator—Indicates whether attenuation is required.
•
Patchcord Type—Indicates the level of attenuation that is required, if needed.
•
Position-2—The second position rack, shelf, and slot. For example, Rack#1.Main Shelf.02 refers to
•
Slot 2 in the Main Shelf of Rack #1. Refer to the Cisco MetroPlanner Site Dialog window for rack
and shelf names and locations.
Unit-2—The ONS 15454 DWDM card (unit) that is installed in the Position-2 slot.
•
Port #2—The port identifier shown in CTC for the first Position-2 connection.
•
Port ID-2—The port identifier shown in TL1 for the Position-2 connection.
•
Port Label-2—The name of the physical port printed on the card's front plate and shown in CTC
•
card view for the Position-2 connection.
Manually Set—Indicates whether you must create the connection manually in CTC.
•

Figure 3-10 Cisco MetroPlanner Internal Connections Table

IP Address
Site
Export the internal connections table:
Step 3
Click Export.
a.
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
3-36
Unit-1
Position-1 Port#-1
Port ID-1 Attenuator
Port Label-1 Patchcord Type
Chapter 3 Turn Up a Node
Position-2
September 2004