Chapter 14
Card Reference
14.8.5.2 Faceplate
Figure 14-60
Figure 14-60 MXP_2.5G_10E Faceplate and Ports
14.8.5.3 Client Interfaces
The MXP_2.5G_10E provides four intermediate- or short-range OC-48/STM-16 ports per card on the
client side. Both SR-1 or IR-1 optics can be supported and the ports utilize SFP connectors. The client
interfaces use four wavelengths in the 1310-nm, ITU 100-MHz spaced channel grid.
14.8.5.4 DWDM Interface
The MXP_MP_10E serves as an OTN multiplexer, transparently mapping four OC-48 channels
asynchronously to ODU1 into one 10-Gbps trunk. The DWDM trunk is tunable for transmission over
four wavelengths in the 1550-nm, ITU 100-GHz spaced channel grid.
Figure 14-61
December 2004
shows the MXP_2.5G_10E faceplate and ports.
4x2.5
10 E
MxP
530.33-
1550.12
FAIL
ACT/STBY
SF
shows the block diagram for the MXP_2.5G_10E card.
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
14.8.5 MXP_2.5G_10E Card
14-107