Shelf Hardware Reference - Cisco ONS 15454 DWDM Installation And Operation Manual

Shelf Hardware Reference

This chapter provides a description of Cisco ONS 15454 hardware for the ANSI and ETSI shelf
assemblies. For card descriptions, see
Chapter 1, "Install the Shelf and Common Control Cards."
Unless otherwise specified, "ONS 15454" refers to both ANSI and ETSI shelf assemblies.
Note
Chapter topics include:
13.1 Overview, page 13-2
•
13.2 ONS 15454 ANSI Rack Installation, page 13-3
•
13.3 ONS 15454 ETSI Rack Installation, page 13-7
•
13.4 FlexLayer and Y-Cable Protection, page 13-10
•
13.5 Typical DWDM Rack Layouts, page 13-16
•
13.6 Front Door, page 13-19
•
• 13.7 ONS 15454 ANSI Backplane Covers, page 13-26
• 13.8 ONS 15454 ETSI Front Mount Electrical Connection, page 13-30
• 13.9 ONS 15454 ANSI Alarm Expansion Panel, page 13-30
13.10 Cable Routing and Management, page 13-36
•
13.11 Fan-Tray Assembly, page 13-41
•
13.12 Power and Ground Description, page 13-43
•
13.13 ONS 15454 ANSI Alarm, Timing, LAN, and Craft Pin Connections, page 13-44
•
13.14 Cards and Slots, page 13-49
•
The Cisco ONS 15454 shelf assemblies are intended for use with telecommunications equipment only.
Note
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
September 2004
C H A P T E R
Chapter 14, "Card Reference."
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
13
To install equipment, see
13-1