Alarm Profile Editing; Alarm Severity Options; Table 20-5 Alarm Profile Buttons; Table 20-6 Alarm Profile Editing Options - Cisco ONS 15454 DWDM Installation And Operation Manual

Hide thumbs Also See for ONS 15454 DWDM:

Table of Contents

Alarm Monitoring and Management

20.5.3 Alarm Profile Editing

item in the profile column (such as Default).

To change or assign alarm severity, left-click the alarm severity you want to change in the alarm profile

column. Seven severity levels appear for the alarm:

Inherited and Use Default severity levels only appear in alarm profiles. They do not appear when you

view alarms, history, or conditions.

September 2004

Creates a new profile.

Loads a profile to a node or a file.

Saves profiles on a node (or nodes) or in a file.

Deletes profiles from a node.

Displays differences between alarm profiles (for example, individual alarms that

are not configured equivalently between profiles).

Displays all profiles available on each node.

Displays all entities (nodes and alarm subjects) present in the network and which

profiles contain the alarm. Can be printed.

lists and describes the five profile-editing options available when you right-click an alarm

Saves a profile in a node or in a file.

Changes a profile name.

Creates a profile that contains the same alarm severity settings as the profile being cloned.

Restores a profile to its previous state or to the original state (if it has not yet been applied).

Removes a profile from the table editor.

Not Reported (NR)

Not Alarmed (NA)

Critical (CR)

Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7

20.5.3 Alarm Profile Editing