Multiplexer, Demultiplexer, And Oadm Card Interface Classes; Table 14-3 Ons 15454 Card Interfaces Assigned To Input Power Classes; Table 14-4 10-Gbps Interface Optical Performances - Cisco ONS 15454 DWDM Installation And Operation Manual

Hide thumbs Also See for ONS 15454 DWDM:
Table of Contents

Advertisement

Chapter 14
Card Reference

14.1.7 Multiplexer, Demultiplexer, and OADM Card Interface Classes

The 32MUX-O, 32WSS, 32DMX, 32DMX-O, 4MD-xx.x, AD-1C-xx.x, AD-2C-xx.x, and AD-4C-xx.x
cards have different input and output optical channel signals, depending upon the interface card where
the input signal originates. The input interface cards have been grouped in classes listed in
The subsequent tables list the optical performances and output power of each interface class.

Table 14-3 ONS 15454 Card Interfaces Assigned to Input Power Classes

Input Power Class
A
B
C
D
E
F
G
H
I
10-Gbps cards that provide signal input to OADM cards have the optical performances listed in
Table
on page

Table 14-4 10-Gbps Interface Optical Performances

Parameter
Type
Maximum bit rate
Regeneration
FEC
Threshold
Maximum BER
OSNR
Power sensitivity
Power overload
December 2004
Card
10 Gbps multirate transponder (TXP_MR_10G or TXP_MR_10E) with forward
error correction (FEC) enabled or 10 Gbps muxponder (MXP_2.5G_10G or
MXP_2.5G_10E) with FEC enabled
10 Gbps multirate transponder (TXP_MR_10G) without FEC or 10 Gbps
muxponder (MXP_2.5G_10G) with FEC disabled
OC-192 LR ITU, TXP_MR_10E without FEC
2.5-Gbps multirate transponder (TXP_MR_2.5G), both protected and
unprotected, with FEC enabled
2.5-Gbps multirate transponder (TXP_MR_2.5G), both protected and
unprotected, with FEC disabled and reshape, regenerate, and retime (3R) mode
enabled, or OC-48 100 GHz DWDM muxponder (MXP_MR_2.5G)
2.5-Gbps multirate transponder (TXP_MR_2.5G), both protected and
unprotected, in regenerate and reshape (2R) mode
OC-48 ELR 100 GHz
2/4 port GbE Transponder (GBIC WDM 100GHz)
TXP_MR_10E with extended FEC (E-FEC) or MXP_2.5G_10E with E-FEC
14-4. 2.5-Gbps card interface performances are listed in
14-9.
Class A
Power
limited
10 Gbps
2
3R
Yes
Optimum
3
–15
10
1
sensitivity
23 dB
–24 dBm –18 dBm –21
-8 dBm
14.1.7 Multiplexer, Demultiplexer, and OADM Card Interface Classes
Class B
1
OSNR
Power
OSNR
limited
limited
limited
10 Gbps
3R
No
Average
–12
10
9 dB
23 dB
19 dB
–20
dBm
dBm
-8 dBm
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
Table 14-5 on page 14-8
and
Class C
Class I
Power
OSNR limited
limited
10 Gbps
10 Gbps
3R
3R
No
Yes (E-FEC)
Average
Optimum
–12
–15
10
10
19 dB
20 dB
–22 dBm
–26
dBm
-9 dBm
-8 dBm
Table
14-3.
Table 14-6
OSNR
limited
8 dB
–18
dBm
14-7

Advertisement

Table of Contents
loading

Table of Contents