Dlp-G52 Change The Jre Version - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G52 Change the JRE Version

Step 6 Return to your originating procedure (NTP).
DLP-G52 Change the JRE Version
Purpose
Tools
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
This task is not used in Release 4.7 because only one JRE version is supported. This task is used in CTC
Note
releases that support multiple JRE versions.
From the Edit menu, choose Preferences.
Step 1
Click the JRE tab. The JRE tab shows the current JRE version and the recommended version.
Step 2
Click the Browse button and navigate to the JRE directory on your computer.
Step 3
Choose the JRE version.
Step 4
Click OK.
Step 5
From the File menu, choose Exit.
Step 6
In the confirmation dialog box, click Yes.
Step 7
Step 8 Return to your originating procedure (NTP).
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
2-32
This task changes the JRE version, which is useful if you would like to
upgrade to a later JRE version from earlier one without using the software
or documentation CD. This does not affect the browser default version.
After selecting the desired JRE version, you must exit CTC. The next time
you log into a node, the new JRE version will be used.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
Chapter 2 Connect the PC and Log into the GUI
September 2004