Cisco ONS 15454 DWDM Installation And Operation Manual page 913

Hide thumbs Also See for ONS 15454 DWDM:
Table of Contents

Advertisement

Appendix B
Hardware Specifications
Client ports: 8x SFP
Performance monitoring (PM) for all interfaces
Buffer-to-buffer credit management for distance extension
Line (trunk side)
Caution
Transmitter (trunk side)
An optical device on the card keeps the laser wavelength locked as closely as possible to the ITU nominal
Note
value. The allowed drift is +/- 25 pm.
Currently available wavelengths of the TXP_MR_2.5G and TXPP_MR_2.5G cards:
ITU grid blue band: 1530.334 to 1544.526 nm
ITU grid red band: 1546.119 to 1560.606 nm
Receiver (trunk side)
April 2006
Mixed configurations up to maximum line rate (for example, if you have a port configured for
2G FC, you cannot use another port at the same time)
Bit rate: 2.488 Gbps for OC-48/STM-16
Code: Scrambled NRZ
Fiber: 1550-nm single-mode
Maximum chromatic dispersion allowance: 6000 ps/nm
Loopback modes: Terminal and facility
You must use a 20-dB fiber attenuator (15 to 25 dB) when working with the MXP_MR_2.5G
and MXPP_MR_2.5G cards in a loopback on the trunk port. Do not use direct fiber loopbacks
with the MXP_MR_2.5G and MXPP_MR_2.5G cards. Using direct fiber loopbacks causes
irreparable damage to the MXP_MR_2.5G and MXPP_MR_2.5G cards.
Connectors: LC
Compliance: Telcordia GR-253-CORE, Telcordia GR-2918-CORE, Issue 2, ITU-T G.957, and
ITU-T 100-GHz grid standard G.692
Transmit power: +3 +/–1 dBm with MXP_MR_2.5G card, and +/–1 dBm with
MXPP_MR_2.5G card
50-GHz DWDM migration ready (the wavelength deviation is less than +/–0.040 nm through
wavelocker deployment)
Four-channel wavelength tunability at 100-GHz spacing
Transmitter maximum return reflectance: –27 dB
Chromatic dispersion allowance: 5400 ps/nm, giving an optical power penalty < 2.0 dB
Minimum side mode suppression ratio: 30 dB
Transmitter is a direct modulated laser
Wavelength stability (drift): +/- 25 picometers (pm)
Receiver sensitivity –28 dBm, BER 1 * 10 exp – 12
Receiver overload is equal to or exceeds –8 dBm
B.5.4 MXP_MR_2.5G and MXPP_MR_2.5G Card Specifications
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
B-37

Advertisement

Table of Contents
loading

Table of Contents