Ntp-G85 Modify Or Delete Communications Channel Terminations And Provisionable Patchcords; Dlp-G184 Change A Gcc Termination - Cisco ONS 15454 DWDM Installation And Operation Manual

NTP-G85 Modify or Delete Communications Channel Terminations and Provisionable Patchcords

NTP-G85 Modify or Delete Communications Channel
Terminations and Provisionable Patchcords
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Deleting a OSC termination can cause you to lose visibility of nodes that do not have other OSCs or
Caution
network connections to the CTC computer.
Step 1 Complete the
Step 2.
In node view, complete the following tasks as needed:
Step 2
•
•
•
•
Stop. You have completed this procedure.

DLP-G184 Change a GCC Termination

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Click the Provisioning > Comm Channels > GCC tabs.
Step 1
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
9-28
This procedure modifies and deletes GCC and OSC terminations, as well
as deletes provisionable patchcords on the ONS 15454.
None
DLP-G76 Provision GCC Terminations, page 3-62
DLP-G75 Create OSC Terminations, page 3-61
As needed
Onsite or remote
Provisioning or higher
"DLP-G46 Log into CTC" task on page
To modify a GCC termination, complete the
page 9-28.
To delete a GCC termination, complete the
page 9-29.
To delete an OSC termination, complete the
page 9-30.
To delete a provisioning patchcord, complete the
task on page 9-30.
This task modifies a GCC termination. You can enable or disable OSPF and
enable or disable the foreign node setting.
None
DLP-G46 Log into CTC, page 2-25
As needed
Remote
Provisioning or higher
2-25. If you are already logged in, continue with
"DLP-G184 Change a GCC Termination" task on
"DLP-G185 Delete a GCC Termination" task on
"DLP-G186 Delete an OSC Termination" task on
"DLP-G187 Delete a Provisionable Patchcord"
Chapter 9 Manage the Node
or
September 2004