B.4.4 OPT-BST Amplifier Card Specifications
•
•
B.4.4 OPT-BST Amplifier Card Specifications
•
•
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
B-14
–
Gain and power regulation over/undershoot: 0.5 dB
Limited maximum output power: 17.5 dBm
–
Maximum output power (with full channel load): 17 dB
–
Minimum output power (with one channel): –1 dBm
–
Input power (Pin) range at full channel load: –21.5 to 12 dBm
–
Input power (Pin) range at single channel load: –39.5 to –6 dBm
–
3
Noise figure at G
21 dB = 6.5 dB
–
OSC filter drop (channels) insertion loss maximum: 1 dB
–
OSC filter drop (OSC) insertion loss maximum: 1.8 dB
–
OSC filter add (OSC) insertion loss maximum: 1.3 dB
–
Optical connectors: LC-UPC/2
–
Environmental
Operating temperature:
–
C-Temp: –5 to +55 degrees Celsius (+23 to +131 degrees Fahrenheit)
Operating humidity: 5 to 85%, noncondensing
–
Dimensions
–
Height: 12.65 in. (332 mm)
Width: 0.92 in. (24 mm)
–
Depth: 9.00 in. (240 mm)
–
Optical characteristics:
Total operating wavelength range: 1530 to 1561.3 nm
–
Gain ripple (peak to valley): 1.5 dB
–
Gain range: 5 to 20 dBm with programmable gain tilt
–
Gain and power regulation over/undershoot: 0.5 dB
–
–
Limited maximum output power: 17.5 dBm
–
Maximum output power (with full channel load): 17 dB
Minimum output power (with one channel): –1 dBm
–
Input power (Pin) range at full channel load: –3 to 12 dBm
–
Input power (Pin) range at single channel load: –21 to –6 dBm
–
3
Noise figure at G
20 dB = 6 dB
–
OSC filter drop (channels) insertion loss maximum: 1 dB
–
OSC filter drop (OSC) insertion loss maximum: 1.8 dB
–
OSC filter add (OSC) insertion loss maximum: 1.3 dB
–
Optical connectors: LC-UPC/2
–
Environmental
Appendix B
Hardware Specifications
April 2006