Table 10-53 Mxp_Mr_2.5G And Mxpp_Mr_2.5G Muxponder Card Line Threshold Settings - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G240 Change Line Threshold Settings for MXP_MR_2.5G and MXPP_MR_2.5G Cards

Table 10-53 MXP_MR_2.5G and MXPP_MR_2.5G Muxponder Card Line Threshold Settings

RMON Thresholds
Index
Slot/Port
Variable
Alarm Type
Sample Type
Sample Period The number of seconds for which the
Rising
Threshold
Falling
Threshold
SONET Thresholds
Port
CV
ES
SES
SEFS
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
10-74
1
Identifies the threshold.
Identifies the slot and port to which the
threshold applies.
The particular remote monitoring
(RMON) count under consideration for
the threshold definition.
The direction for which the alarm is to
activate.
Whether the samples should be absolute
or relative.
RMON count for the variable is
accumulated.
The rising threshold value.
The falling threshold value.
2
Display only. Port number.
Coding violations.
Errored seconds.
Severely errored seconds.
(Section only.) Severely errored framing
seconds.
Chapter 10 Change Card Settings
Numeric
Sx/Px, where x is a numeric value
A text mnemonic, for example:
"gfpStatsRxSBitErrors"
Rising
•
• Falling
• Absolute
• Relative
Numeric (seconds)
Numeric
Numeric
9 (trunk for MXP_MR_2.5G)
•
9-10 (trunk for MXPP_MR_2.5G)
•
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for Line (Far End only), Section, or
Path. Select the bullet and click Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for Line (Far End only), Section, or
Path. Select the bullet and click Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for Line (Far End only), Section, or
Path. Select the bullet and click Refresh.
Numeric. Can be set for Far End, for
15-minute or one-day intervals for
Section only. Select the bullet and click
Refresh.
September 2004