DLP-G221 Change OTN Settings for TXP_MR_10G and TXP_MR_10E Cards
Table 10-26 TXP_MR_10G and TXP_MR_10E Transponder Card FEC Threshold Settings
Parameter
Port
Bit Errors
Corrected
Uncorrectable
Words
Table 10-27
Table 10-27 TXP_MR_10G and TXP_MR_10E Transponder Card Trail Trace Identifier Settings
Parameter
Port
Level
Trace Mode
Transmit
Expected
Received
Click Apply.
Step 4
Return to your originating procedure (NTP).
Step 5
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
10-42
Description
Display only. Displays the port number
and optional name.
Displays the number of bit errors
corrected during the selected time period.
Displays the number of uncorrectable
words in the selected time period.
describes the values on the Provisioning > OTN > Trail Trace Identifier tab.
Description
Sets the port number.
Sets the level.
Sets the trace mode.
Displays the current transmit string;
sets a new transmit string.
Displays the current expected string;
sets a new expected string.
Display only. Displays the current
received string. You can press the Refresh
button to manually refresh this display, or
select the Auto-refresh every 5 sec check
box to keep this panel updated.
Chapter 10
Change Card Settings
Options
2
Numeric display. Can be set for
15-minute or one-day intervals.
Numeric display. Can be set for
15-minute or one-day intervals.
Options
1
•
2
•
Section
•
Path
•
Off/None
•
Auto
•
Manual
•
String of trace string size;
trail trace identifier is 64 bytes in length.
String of trace string size
String of trace string size
September 2004