Dlp-G48 Create Login Node Groups - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 2 Connect the PC and Log into the GUI
Step 3 Return to your originating procedure (NTP).

DLP-G48 Create Login Node Groups

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the Edit menu in node view, choose Preferences.
Step 1
Step 2 Click Login Node Group and Create Group.
Step 3 Enter a name for the group in the Create Login Group Name dialog box. Click OK.
Step 4 In the Members area, type the IP address (or node name) of a node you want to add to the group. Click
Add. Repeat this step for each node that you want to add to the group.
Step 5 Click OK.
The next time you log into an ONS 15454, the login node group will be available in the Additional Nodes
list of the Login dialog box. For example, in
IP addresses for Nodes 1, 4, and 5. During login, if you choose this group from the Additional Nodes
list and Disable Network Discovery is not selected, all nodes in the figure appear. If the login group and
Disable Network Discovery are both selected, only Nodes 1, 4, and 5 appear. You can create as many
login groups as you need. The groups are stored in the CTC preferences file and are not visible to other
users.
September 2004
This task creates a login node group to display ONS 15454s that have an IP
connection but not a DCC connection to the login node.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
Figure 2-2, a login node group is created that contains the
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
DLP-G48 Create Login Node Groups
2-29