Manage The Ctc Window - Cisco ONS 15454 DWDM Installation And Operation Manual

Manage the CTC Window

Table A-2
Node Name
ROADM
Terminal (west)
Terminal (east)
Line
OSC regeneration line
Unknown
Manage the CTC Window
Different navigational methods are available within the CTC window to access views and perform
management actions. You can double-click and right-click objects in the graphic area and move the
mouse over nodes, cards, and ports to view popup status information.
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
A-4
Description of Node Icons on Network View Map (continued)
Icon
Appendix A
Description
A reconfigurable OADM (ROADM) node icon is represented
as a three-dimensional cylinder with two amplifier symbols
that have arrows between them. An ROADM node contains at
least one 32-channel Wavelength Selective Switch (32WSS).
A single-slot 32DMX or double-slot 32DMX-O can be
installed, but is not required. Transponders (TXPs) and
muxponders (MXPs) can be installed in Slots 6 and 12. If
amplification is not used, TXPs or MXPs can be installed in
Slots 1 and 17. If OPT-BSTs are not installed, Optical Service
Channel and Combiner/Separator Module (OSC-CSM) cards
are installed in Slots 2 and 16 and Slots 8 and 10 are empty.
A terminal (west) node is represented as a three-dimensional
cylinder with one amplifier on the west side of the icon.
• A terminal node contains one 32DMX or 32DMX-O and
one 32-MUX-O. No OADM cards are provisioned.
A flexible terminal node contains a series of OADM and
•
amplifier cards.
A terminal (east) node is represented as a three-dimensional
square with one amplifier on the east side of the icon.
• A terminal node contains one 32DMX or 32DMX-O and
one 32MUX-O. No OADM cards are provisioned.
A flexible terminal node contains a series of OADM and
•
amplifier cards.
Line and OSC regeneration line nodes are represented as a
three-dimensional cylinder with one arrow pointing west and
another arrow pointing east.
A line node has only Optical Preamplifier (OPT-PRE) or
•
OPT-BST amplifiers provisioned.
An optical service channel (OSC) regeneration line node
•
contains two OSC-CSM cards.
An unknown DWDM node icon is represented as a
three-dimensional cylinder with one arrow pointing north. An
unknown node means that the provisioned cards do not allow
the node to fit any of the defined DWDM node categories.
CTC Information and Shortcuts
September 2004