Figure 11-3 Reinitialization Tool In Windows; Figure 11-4 Confirming Ne Restoration - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 11 Maintain the Node

Figure 11-3 Reinitialization Tool in Windows

If the node you are reinitializing is an end network element (ENE) in a proxy server network, enter the
Step 5
IP address of the gateway network element (GNE) in the GNE IP field. If not, leave it blank.
Step 6 Enter the node name or IP address of the node you are reinitializing in the Node IP field
If the User ID field does not contain your user ID, enter the ID. Enter your password in the Password
Step 7
field.
Step 8 Verify that the Re-Init Database, Upload Package, and Confirm check boxes are checked. If one is not
checked, check the check box.
In the Search Path field, verify that the path to the CISCO15454 folder on the CD drive is listed.
Step 9
Before you perform the next step, be sure you are uploading the correct database. You cannot reverse the
Caution
upload process after you click Yes.
Click Go. A confirmation dialog box appears
Step 10

Figure 11-4 Confirming NE Restoration

Click Yes.
Step 11
The status bar at the bottom of the screen displays Complete when the node has activated the software
Step 12
and uploaded the database.
Note
September 2004
DLP-G248 Use the Reinitialization Tool to Clear the Database and Upload Software (Windows)
The Complete message only indicates that the TCC2 successfully uploaded the database, not that
the database restore was successful. The TCC2 then tries to restore the database after it reboots.
(Figure 11-4).
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
(Figure 11-3).
11-7