Ntp-G17 Set Up Computer For Ctc - Cisco ONS 15454 DWDM Installation And Operation Manual

NTP-G17 Set Up Computer for CTC

NTP-G17 Set Up Computer for CTC
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
JRE 1.4.2 is required to log into nodes running Release 4.7. To log into nodes running Release 4.5 or
Note
earlier, you must uninstall JRE 1.4.1 and install JRE 1.3.1_2.
If your computer does not have an appropriate browser installed, complete the following:
Step 1
•
•
If your computer is a Windows PC, complete the
Step 2
Windows" task on page
If your computer is a UNIX workstation, complete the
Step 3
UNIX" task on page
Step 4 When your PC or workstation is set up, continue with the setup procedure appropriate to your network:
•
•
•
Cisco recommends that you configure your browser to disable the caching of user IDs/passwords on
Note
computers used to access Cisco optical equipment.
In Internet Explorer, choose Tools > Internet Options > Content. Click Auto Complete and uncheck
the User names and passwords on forms option.
In Netscape 7.0, choose Edit > Preferences > Privacy & Security > Forms and uncheck the option to
save form data. For passwords, choose Edit > Preferences > Privacy & Security > Passwords and
uncheck the option to remember passwords. Note that passwords can be stored in an encrypted format.
Netscape versions earlier than 6.0 do not cache user IDs and passwords.
Stop. You have completed this procedure.
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
2-2
This procedure configures your PC or UNIX workstation to run CTC.
Cisco ONS 15454 Release 4.7 software or documentation CD
DLP-G33 Install the TCC2 Card, page 1-73
Required
Onsite or remote
None
To install Netscape 7.x, download the browser at the following site:
http://channels.netscape.com/ns/browsers/default.jsp
To install Internet Explorer 6.x on a PC, download the browser at the following site:
http://www.microsoft.com
2-3, then go to
2-6.
NTP-G18 Set Up CTC Computer for Local Craft Connection to the ONS 15454, page 2-9
NTP-G19 Set Up a CTC Computer for a Corporate LAN Connection to the ONS 15454, page 2-20
NTP-G20 Set Up a Remote Access Connection to the ONS 15454, page 2-22
Chapter 2
"DLP-G37 Run the CTC Installation Wizard for
Step 4.
"DLP-G38 Run the CTC Installation Wizard for
Connect the PC and Log into the GUI
September 2004