Dlp-G53 Configure The Ctc Alerts Dialog Box For Automatic Popup - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 2 Connect the PC and Log into the GUI

DLP-G53 Configure the CTC Alerts Dialog Box for Automatic Popup

Purpose
Tools
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Click the CTC Alerts toolbar icon.
Step 1
Step 2 In the CTC Alerts dialog box, choose one of the following:
•
•
•
Step 3 Click Close.
Step 4 Return to your originating procedure (NTP).
September 2004
This task sets up the CTC Alerts dialog box to open for all alerts, for circuit
deletion errors only, or never. The CTC Alerts dialog box displays network
disconnection, Send-PDIP inconsistency, circuit deletion status, condition
retrieval errors, and software download failure.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Provisioning or higher
All alerts—Sets the CTC Alerts dialog box to open automatically for all notifications.
Error alerts only—Sets the CTC Alerts dialog box to open automatically for circuit deletion errors
only.
Never—Sets the CTC Alerts dialog box to never open automatically.
DLP-G53 Configure the CTC Alerts Dialog Box for Automatic Popup
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
2-33