Scenario 2: Ctc And Ons 15454S Connected To A Router; Figure 19-1 Scenario 1: Ctc And Ons 15454S On Same Subnet (Ansi And Etsi) - Cisco ONS 15454 DWDM Installation And Operation Manual

Hide thumbs Also See for ONS 15454 DWDM:
Table of Contents

Advertisement

Chapter 19
CTC Connectivity Reference

Figure 19-1 Scenario 1: CTC and ONS 15454s on Same Subnet (ANSI and ETSI)

Subnet Mask 255.255.255.0

19.2.2 Scenario 2: CTC and ONS 15454s Connected to a Router

In Scenario 2, the CTC computer resides on a subnet (192.168.1.0) and attaches to LAN A
The ONS 15454s reside on a different subnet (192.168.2.0) and attach to LAN B. A router connects LAN
A to LAN B. The IP address of router interface A is set to LAN A (192.168.1.1), and the IP address of
router interface B is set to LAN B (192.168.2.1). The routers each have a subnet mask of 255.255.255.0.
On the CTC computer, the default gateway is set to router interface A. If the LAN uses DHCP (Dynamic
Host Configuration Protocol), the default gateway and IP address are assigned automatically. In the
Figure 19-2
September 2004
CTC Workstation
IP Address 192.168.1.100
Subnet Mask 255.255.255.0
Default Gateway = N/A
Host Routes = N/A
ONS 15454 #1
IP Address 192.168.1.10
Default Router = N/A
Static Routes = N/A
example, a DHCP server is not available.
19.2.2 Scenario 2: CTC and ONS 15454s Connected to a Router
ONS 15454 #2
IP Address 192.168.1.20
Subnet Mask 255.255.255.0
Default Router = N/A
Static Routes = N/A
Ring
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
LAN A
ONS 15454 #3
IP Address 192.168.1.30
Subnet Mask 255.255.255.0
Default Router = N/A
Static Routes = N/A
(Figure
19-2).
19-3

Advertisement

Table of Contents
loading

Table of Contents