Cisco ONS 15454 DWDM Installation And Operation Manual page 9

Manage Alarms
7
C H A P T E R
Monitor Performance
8
C H A P T E R
September 2004
7-1
Before You Begin
7-1
NTP- G63 Document Existing Provisioning
DLP- G113 Print CTC Data
DLP- G114 Export CTC Data
NTP- G64 View Alarms, History, Events, and Conditions
DLP- G115 View Alarms
DLP- G116 View Alarm or Event History
DLP- G117 Change the Maximum Number of Session Entries for Alarm History
DLP- G118 Display Alarms and Conditions Using Time Zone
DLP- G119 Synchronize Alarms
DLP- G120 View Conditions
NTP- G65 Delete Cleared Alarms from Display
NTP- G66 View Alarm-Affected Circuits
NTP- G67 View Alarm Counts on the LCD for a Node, Slot, or Port
NTP- G68 Create, Download, and Assign Alarm Severity Profiles
DLP- G121 Create a New or Cloned Alarm Severity Profile
DLP- G122 Download an Alarm Severity Profile
DLP- G123 Apply Alarm Profiles to Ports
DLP- G124 Apply Alarm Profiles to Cards and Nodes
DLP- G125 Delete Alarm Severity Profiles
NTP- G69 Enable, Modify, or Disable Alarm Severity Filtering
DLP- G126 Enable Alarm Filtering
DLP- G127 Modify Alarm, Condition, and History Filtering Parameters
DLP- G128 Disable Alarm Filtering
NTP- G70 Suppress Alarms or Discontinue Alarm Suppression
DLP- G129 Suppress Alarm Reporting
DLP- G130 Discontinue Alarm Suppression
NTP- G71 Provision External Alarms and Controls on the Alarm Interface Controller Card
NTP- G72 Provision External Alarms and Controls on the Alarm Interface Controller-International
8-1
Before You Begin
8-1
NTP- G73 Change the PM Display
DLP- G131 Refresh PM Counts at 15-Minute Intervals
DLP- G132 Refresh PM Counts at One-Day Intervals
DLP- G133 View Near-End PM Counts
DLP- G134 View Far-End PM Counts
7-2
7-2
7-4
7-6
7-8
7-11
7-12
7-13
7-14
7-22
7-23
7-27
7-29
7-32
7-33
7-35
8-2
8-4
8-4
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
7-5
7-11
7-16
7-17
7-18
7-26
7-29
7-30
7-33
8-2
8-3
Contents
7-10
7-36
7-38
ix