Table 10-32 Mxp_2.5G_10G Or Mxp_2.5G_10E Muxponder Card Line Threshold Settings - Cisco ONS 15454 DWDM Installation And Operation Manual

DLP-G226 Change Line Thresholds Settings for MXP_2.5G_10G and MXP 2.5G_10E Cards
In Table
Note
MXP_2.5G_10E cards. When the tabs or selections do not apply they do not appear to the user.

Table 10-32 MXP_2.5G_10G or MXP_2.5G_10E Muxponder Card Line Threshold Settings

Parameter
Port
CV
ES
SES
SEFS
FC
UAS
Click Apply.
Step 4
Return to your originating procedure (NTP).
Step 5
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
10-50
10-32, some parameter tabs or selections do not always apply to both the MXP_2.5G_10G and
Description
Display only. Port number
Coding violations
Errored seconds
Severely errored seconds
(Section only.) Severely errored framing
seconds
(Line only.) Failure count
(Line only.) Unavailable seconds
Chapter 10 Change Card Settings
Options
1
•
2
•
• 3
• 4
• 5
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for Line (Far End only), Section, or
Path. Select a bullet and click Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for Line (Far End only), Section, or
Path. Select the bullet and click Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
or for Line (Far End only), Section, or
Path. Select the bullet and click Refresh.
Numeric. Can be set for Far End, for
15-minute or one-day intervals for
Section only. Select the bullet and click
Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
for Line only. Select the bullet and click
Refresh.
Numeric. Can be set for Near End or Far
End, for 15-minute or one-day intervals,
for Line only. Select the bullet and click
Refresh.
September 2004