Figure 11-13 Repairing Circuits; Figure 11-14 Recording The Old Mac Address Before Replacing The Aip - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 11 Maintain the Node

Figure 11-13 Repairing Circuits

Step 25 The Node MAC Addresses dialog box appears
a. From the Node drop-down list, choose the name of the node where you replaced the AIP.
In the Old MAC Address field, enter the old MAC address that was recorded in
b.
Click Next.
c.

Figure 11-14 Recording the Old MAC Address Before Replacing the AIP

The Repair Circuits dialog box appears
Step 26
Finish.
September 2004
NTP-G117 Replace the ANSI Shelf Alarm Interface Panel
(Figure 11-14):
(Figure 11-15). Read the information in the dialog box and click
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
Step 3.
11-43