Dlp-G196 Log Out A User-Multiple Nodes - Cisco ONS 15454 DWDM Installation And Operation Manual

Chapter 9 Manage the Node
Step 3 In the Logout User dialog box, check Lockout before Logout if you want to lock the user out. This
prevents the user from logging in after logout based on parameters provided in the user lockouts in the
Policy tab. A manual unlock by a Superuser is required, or the user is locked out for the amount of time
specified in the Lockout Duration field. See the
on page 9-34
Click OK.
Step 4
Click Yes to confirm the logout.
Step 5
Step 6 Return to your originating procedure (NTP).
DLP-G196 Log Out a User—Multiple Nodes
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 From the View menu, chose Go to Network View.
Click the Provisioning > Security > Active Logins tabs.
Step 2
Choose the user you want to log out.
Step 3
Click Logout.
Step 4
In the Logout User dialog box, check the nodes where you want to log out the user.
Step 5
Check Lockout before Logout if you want to lock the user out prior to logout. This prevents the user
Step 6
from logging in after logout based on user lockout parameters provisioned in the Policy tab. A manual
unlock by a Superuser is required, or the user is locked out for the amount of time specified in the
Lockout Duration field. See the
page 9-36
In the Select Applicable Nodes area, uncheck any nodes where you do not want to change the user's
Step 7
settings (all network nodes are selected by default).
Step 8 Click OK.
Step 9 Return to your originating procedure (NTP).
September 2004
for more information.
This task logs out a user from multiple nodes.
None
DLP-G46 Log into CTC, page 2-25
As needed
Onsite or remote
Superuser
"DLP-G189 Change Security Policy—Multiple Nodes" task on
for more information.
"DLP-G188 Change Security Policy—Single Node" task
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
DLP-G196 Log Out a User—Multiple Nodes
9-41