Chapter 14 Card Reference - Cisco ONS 15454 DWDM Installation And Operation Manual

Card Reference
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
Note
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration.
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's
path protection feature, which may be used in any topological network configuration. Cisco does not
recommend using its path protection feature in any particular topological network configuration.
This chapter describes Cisco ONS 15454 dense wavelength division multiplexing (DWDM) card and
client card features and functions. It also describes the common control cards needed to support them as
well as the optical plug-in modules (SFPs). For installation and card turn-up procedures, refer to
Chapter 3, "Turn Up a Node."
Transport Products Safety and Compliance Information document.
Unless otherwise specified, "ONS 15454" refers to both ANSI and ETSI shelf assemblies.
Note
Chapter topics include:
14.1 Card Overview, page 14-2
•
14.2 Common Control Cards, page 14-11
•
• 14.3 Front Mount Electrical Connections, page 14-21
• 14.4 Optical Service Channel Cards, page 14-26
14.5 Optical Amplifier Cards, page 14-35
•
14.6 Multiplexer and Demultiplexer Cards, page 14-44
•
14.7 Optical Add/Drop Multiplexer Cards, page 14-62
•
14.8 Transponder and Muxponder Cards, page 14-86
•
14.9 Transponder and Muxponder Protection, page 14-119
•
14.10 Far-End Laser Control (FELC), page 14-121
•
14.11 Transponder and Muxponder Jitter Considerations, page 14-121
•
14.12 Transponder and Muxponder Termination Modes, page 14-122
•
14.13 SFP Modules, page 14-123
•
December 2004
For card safety and compliance information, refer to the Cisco Optical
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
C H A P T E R
14
14-1