Chapter 14
Card Reference
14.13 SFP Modules
This section describes the small-form factor pluggables (SFPs) that can be used with certain transponder
and muxponder cards.
14.13.1 Compatibility by Card
Table 14-67
Only use SFP certified for use in Cisco Optical Networking Systems. The qualified Cisco SFP pluggable
Caution
module's top assembly numbers (TANs) are provided in
Table 14-67 SFP Card Compatibility
Card
MXP_2.5G_10G
(ONS 15454 SONET/SDH)
MXP_2.5G_10E
(ONS 15454 SONET/ SDH)
MXP_MR_2.5G
MXPP_MR_2.5G
TXP_MR_2.5G
(ONS 15454 SONET/ SDH)
TXPP_MR_2.5G
(ONS 15454 SONET/ SDH)
14.13.2 SFP Description
SFPs are integrated fiber optic transceivers that provide high-speed serial links from a port or slot to the
network. Various latching mechanisms can be utilized on the SFP modules. There is no correlation
between the type of latch to the model type (such as SX or LX/LH) or technology type (such as Gigabit
Ethernet). See the label on the SFP for technology type and model. One type of latch available is a mylar
tab as shown in
a third type of latch is a bail clasp
SFP dimensions are:
•
December 2004
lists the transponder and muxponder cards and their compatible SFPs.
Figure
14-70, a second type of latch available is an actuator/button
Height 0.03 in. (8.5 mm)
Table
Compatible SFP
(Cisco Product ID)
15454-SFP-OC48-IR=
ONS-SE-2G-S1=
15454-SFP-GE+-LX=
15454E-SFP-GE+-LX=
15454-SFP-GEFC-SX=
15454E-SFP-GEFC-S=
15454-SFP3-1-IR=
15454E-SFP-L.1.1=
15454-SFP12-4-IR=
15454E-SFP-L.4.1=
15454-SFP-OC48-IR=
15454E-SFP-L.16.1=
ONS-SE-2G-S1=
15454-SFP-200=
15454E-SFP-200=
15454-SFP-GEFC-SX=
15454E-SFP-GEFC-S=
15454-SFP-GE+-LX=
15454E-SFP-GE+-LX=
(Figure
14-72).
Cisco ONS 15454 DWDM Installation and Operations Guide, R4.7
14.13 SFP Modules
14-67.
Cisco Top Assembly Number (TAN)
10-1975-01
10-2017-01
10-1832-03
10-1832-03
10-1833-01
10-1833-02
10-1828-01
10-1828-01
10-1976-01
10-1976-01
10-1975-01
10-1975-01
10-2017-01
10-1750-01
10-1750-01
10-1833-01
10-1833-02
10-1832-01
10-1832-02
(Figure
14-71), and
14-123